高速风洞引射式进排气动力模拟试验研究

为了测定具有埋入式进气道的某航弹发动机进排气对航弹的气动影响量 ,采用引射式动力模拟器在FL 7高速风洞 ,首次在国内成功地进行了高速风洞进排气动力模拟试验。试验模型缩比为 1∶1 0 ,M =0 .7,P0j/P∞ =2 .62 ,Cφ=0 .79。试验结果表明 ,有动力后XD,CL,CD增加 ,Cma减少。试验表明在高速风洞中对于小尺寸的试验模型 ,采用引射式动力模拟器开展进排气动力模拟试验是一种简便适用的好方法     

一种可利用部分冲压的直升机进气道流场特性实验研究(英文)

针对可利用部分冲压、带前输出轴直升机进气道结构特点 ,实验研究了在侧滑角从 0～ 1 35°状态下的直升机进气道流场特性 ,分析了沿程静压分布、进气道出口截面流场畸变指数、总压恢复系数等进气道性能参数。研究表明 ,该类进气道在各种侧滑状态下总压恢复系数较高。当侧滑角大于 90°时总压恢复系数随着来流速度的增加而减小 ;进气道内气流分离的区域和出口截面流场畸变指数与侧滑角和来流速度的大小有关。其中在侧滑角小于 90°时 ,进气道出口截面流场品质较好。当侧滑角大于90°时 ,随着来流速度或侧滑角的增加出口流场迅速恶化     

基于响应面法的超燃冲压发动机进气道多目标优化

基于响应面法进行了二维混合压缩超燃冲压发动机进气道的多目标优化研究.采用均匀试验设计确定试验方案,运用计算流体动力学求解进气道的性能.根据分析结果构造了响应面近似模型,该模型采用了完全二阶多项式模型.通过响应面近似模型的优化,实现了超燃冲压发动机进气道优化,得到了Pareto最优集.结果表明,采用均匀试验设计和响应面法可以大大减小数值模拟的计算量,提高优化效率.     

高超声速滑翔再入定向定速打击末制导算法

以具有终端落角和落速约束的小升阻比短距滑翔高超声速再入打击飞行器为研究对象，通过引入弹道调整段来实现对飞行器的初步大幅度减速，并使其满足中末制导交班条件，以解决飞行器捕获目标后难以直接对其进行定向定速打击的问题。首先设计了一种变角偏差反馈系数的偏置比例制导律，解决了末端攻击段弹道下压困难以及导引头视场稳定跟踪等问题。在此基础上，建立了一种基于攻角和弹道倾角估计的末端减速指令生成方法，有效解决了基于理想速度曲线减速控制方法精度不足的问题。因此，数值仿真结果表明该制导方案能够有效控制飞行器终端落角和落速，并具有较高的制导精度。     

二元曲面可调进气道流量系数精确预测方法

为了满足二元曲面可调进气道模态转换马赫数范围(来流马赫数为2.2~3.2)的流量要求,针对唇口平移、转动和转动+平移三种调节方案,基于理论分析和基准进气道的流场,提出了一种流量系数精确预测方法,并通过数值计算进行验证且获得了进气道的总体性能。结果表明:调节后的进气道流量系数与预测值完全相等,而且无需多次试算,符合设计预期,可拓展应用于轴对称进气道。相对基准进气道,唇口前移时流量系数和压缩效率同时增加,来流马赫数为2.5时出口总压恢复系数相等而增压比增加了14.6%;在降低相同流量系数条件下,后移唇口使得增压比和压缩效率均降低,来流马赫数为2.5时出口总压恢复系数基本相等而增压比减小了12.9%,转动唇口使增压比进一步减小了9.1%,唇口后移方案性能更优。      

进口水平投影可控的流线追踪内收缩进气道设计

为了满足两侧进气布局飞行器的乘波前体与进气道一体化设计要求,提出了一种进口水平投影可控的流线追踪内收缩进气道设计方法。基于马赫数分布可控的轴对称基准流场,在指定进口水平投影为椭圆的条件下,采用该方法设计了内收缩进气道并在设计点(Ma=5.4)和接力点(Ma=4.0)对其进行数值研究。结果表明,设计点时进气道都能保持基准流场的波系结构和沿程压力分布,无粘时可以全捕获自由来流,喉道性能与基准流场几乎相等。有粘条件下,设计点和接力点时进气道具有较高的压缩效率和良好的流量捕获能力,接力点的流量系数高达0.85。该设计方法为内收缩进气道与乘波前体的一体化设计提供了新途径。     

Prediction of shock-layer ultraviolet radiation for hypersonic vehicles in near space

A systemic and validated model was developed to predict ultraviolet spectra features from the shock layer of near-space hypersonic vehicles in the ‘‘solar blind" band region. Computational procedures were performed with 7-species thermal non-equilibrium fluid mechanics, finite rate chemistry, and radiation calculations. The thermal non-equilibrium flow field was calculated with a two-temperature model by the finite volume technique and verified against the bow-shock ultra-violet(BSUV) flight experiments. The absorption coefficient of the mixture gases was evaluated with a line-by-line method and validated through laboratory shock tube measurements. Using the line of sight(LOS) method, radiation was calculated from three BSUV flights at altitudes of 38,53.5 and 71 km. The investigation focused on the level and structure of ultraviolet spectra radiated from a NO band system in wavelengths of 200–400 nm. Results predicted by the current model show qualitative spatial agreement with the measured data. At a velocity of 3.5 km/s(about Mach11), the peak absolute intensity at an altitude of 38 km is two orders of magnitude higher than that at 53.5 km. Under the same flight conditions, the spectra structures have quite a similar distribution at different viewing angles. The present computational model performs well in the prediction of the ultraviolet spectra emitted from the shock layer and will contribute to the investigation and analysis of radiative features of hypersonic vehicles in near space.     

Numerical analysis of hypersonic thermochemical non-equilibrium environment for an entry configuration in ionized flow

A theoretical methodology for thermochemical non-equilibrium flow combing with the HLLC (Harten-Lax-van Leer Contact) scheme was applied to study the hypersonic thermochemical non-equilibrium environment of an entry configuration in ionized flow. A two-temperature controlling model was utilized and the Gupta’s 11 species (N₂, O₂, NO, O, N, NO⁺, N₂⁺, O₂⁺, N⁺, O⁺, e^?) thermochemical non-equilibrium model was taken. Firstly, numerical calculations of hypersonic thermochemical non-equilibrium environments for different aerodynamic shapes were carried out to verify the reliability of the method above. Then, the method was used to research the effects of ionization and wall catalysis on the hypersonic thermochemical non-equilibrium environment of the entry configuration in ionized flow. The shock stand-off distance can be reduced by thermochemical reactions but doesn’t continue to decrease significantly when ionization occurs. The shock stand-off distance calculated by the 11 species model is 4.2% smaller than that calculated by the 5 species (N₂, O₂, NO, O, N) thermochemical non-equilibrium model without considering ionization. Ionization reduces wall heat flux but increases wall pressure a little. The effect of ionization on aerothermal loads is greater than that of aerodynamic loads. The thermochemical reactions of electrons and ions catalyzed at the wall increase wall heat flux significantly but make a small change in wall pressure. The maximum wall heat flux obtained by only considering the electrons and ions catalyzed at the partially catalytic wall condition is 11.8% less than that calculated at the super-catalytic wall condition.     

Particle swarm optimization applied to hypersonic reentry trajectories

This paper presents the novel use of the particle swarm optimization(PSO)to generate the end-to-end trajectory for hypersonic reentry vehicles in a quite simple formulation.The velocitydependent bank angle profile is developed to reduce the search space of unknown parameters based on the constrained PSO algorithm.The path constraints are enforced by setting the fitness function to be infinite on condition that the particles violate the maximum allowable values.The PSO algorithm also provides a much easier means to satisfy the terminal conditions by adding penalty terms to the fitness function.Furthermore,the approximate reentry landing footprint is fast constructed by incorporating an interpolation model into the standardized bank angle profiles.Numerical simulations demonstrate that the PSO method is a feasible and flexible tool to generate the end-to-end trajectory and landing footprint for hypersonic reentry vehicles.     

高超声速飞行器控制面热防护系统地面试验研究

针对高超声速飞行器控制面研发手段中极其重要的地面试验技术,以X-37轨道飞行器为例,介绍了国外的最新研究进展和关键技术解决途径,以及指导地面试验研究的方法,并针对控制面方案在评估和鉴定中必不可少的高温模态试验,进行了综述和分析。